syntax/opcodes/sostenuto_lo

Default is 0.5, meaning the sustain pedal is down as long as the CC value is anything above 0. To make the pedal only act as "down" past the halfway point, set this to 64 - then the pedal is considered "up" from CC value 0 to 63, and "down" from 64 to 127. Leaving this at the default value of 1, or setting it to some other low number such as 10, is useful when the piano supports half-pedaling. Setting it to 64 is preferred by some users who want to use the sostenuto pedal as an on/off switch for instruments with no half-pedaling.

Examples

sostenuto_lo=64
sostenuto_lo=20